Wiki source code of Panels - A-Frame
Last modified by Lane Duncan on 2023/09/27 20:14
Show last authors
author | version | line-number | content |
---|---|---|---|
1 | LHHS Band has **eight** large A-frame panels for props. | ||
2 | |||
3 | Panel dimensions are **9' x 7'**. Folded width is ~~**2 in**. Unfolded, each panel is **4' x 7'** at the base, and the height is a little less than **9' **(8.775'). | ||
4 | |||
5 | To assemble these frames, a 4' square pipe is pivoted down to meet up with the pin holding on the wheel. | ||
6 | |||
7 | [[image:image-20221020151103-2.png]] | ||
8 | |||
9 | [[image:image-20221020151523-1.png]] | ||
10 | |||
11 | |||
12 | {{diagram/}} | ||
13 | |||
14 | Each panel has a circumference of 32 linear feet, plus the additional 7 feet of the middle support. If the covering is attached using tape, that means that all (8) A-Frame panels together will require 312 feet of tape. | ||
15 | |||
16 | Combined with the 12 kickstand panels, 744 feet of tape is required to attach coverings to all the panels. | ||
17 | |||
18 | The best price we've found on the 3M VHB foam tape for this is [[Scotch-Mount Extreme Double-Sided Mounting Tapes 1-in x 33.33-ft Double-Sided Tape in the Double-Sided Mounting Tape department at Lowes.com>>url:https://www.lowes.com/pd/Scotch-Mount-1-in-x-33-33-ft-Two-Sided-Tape/1002036724]], which at $22 for a 33ft roll comes out to about $0.66/ft. |